
PAGE 3 OF 24
Electrical installation.
This appliance must be earthed and the
manufacturer and the seller do not ac-
cept responsibility for any damage due to
incorrect installation or electrical connec-
tion.
•
This appliance should not be connected
through an earth leakage system.
Refer to S.A.B.S. 0142.
•
Support the oven in front of the aperture
and make the electrical connection before
installing. This will ensure enough cable
length for subsequent servicing.
Installation
Connection to the power supply
The connection must be carried out by a li-
censed electrician, who will ensure that the
oven is correctly connected and safely
earthed. The rated current is printed on the
serial number label attached to the oven
side trim.
The appliance must be connected to the
mains through a double pole isolating
switch which has a minimum clearance be-
tween the contacts of 3 mm. in both poles.
A means for disconnection must be pro-
vided in the fixed wiring.
•
Slide the oven fully into the cabinet be-
fore securing it.
•
Fixing holes are located on the side trims.
Secure the oven by inserting small wood
screws through these holes into the cabi-
net side wall. (screws are not provided)
•
It is adequate to only secure the unit on
one side. (same side as the handle)
40 MIN
580
700
665
+3
-0
+3
-0
For hob aperture see hob owner's manual
Note:
Hob installation for under-counter oven.
•
Hobs have their own dedicated owner’s manual,
detailing installation and operating instructions.
•
Do not discard the hob packaging before first
retrieving this manual.
Aperture
nice